[BETA][2017.01.03] SuperSU v2.79 SR2 Latest Build

This thread is for SuperSU releases that are still in testing, and are not yet available through the Play store. The main thread for stable SuperSU releases is located here: SuperSU V2.79. The changelogs are in the old release thread.

Please keep track of the version numbers in the thread titles, as the latest test release may not always be newer than the latest stable release.

The latest test release is: 
SR2-SuperSU-v2.79-SR2-20170103215521.zip
That is a recovery flashable ZIP (I recommend FlashFire or TWRP). If you want to install via APK, it is also present inside the ZIP, in the common folder.

Huawei Nova with Android 7.0 Nougat & EMUI 5.0

Android 7.0 Nougat with EMUI 5.0 is now available for Huawei Nova europen version (can-L11 C432Bxxx firmware) and you can install it without unlocking bootloader. System is really perfect and i can reccomended it for daily use. So how to install it 

1. backup all your data. If all is going fine, than there will be no wipe, but it is better to have backup
2a. download firmware for your phone and unpack zip file
Download
2b. download also HW eu package Download
2c. Mirror (both important files together) - http://depositfiles.com/files/agotwcnwd
3. first install main UPDATE.APP file (around 3 GB large, you will get after you unzip file from step 2a or it is in update folder from 2c. Put UPDATE.APP file from update folder to dload folder on your microSD card, turn off your phone and than power it with holding all three buttons on right side together (release them when you see Huawei logo)
4. after phone boot up, you can go to second part if installation
5. remove UPDATE.APP file from dload folder and place here update_data_full_CAN-L11_hw_eu.zip, than rename it to update.zip
6. turn off your phone and than power it with holding all three buttons on right side together (release them when you see Huawei logo)
7. you get fully working Android 7.0 Nougat
8. there can be error in step 6, than you need co extract update_data_full_CAN-L11_hw_eu.zip and flash only UPDATE.APP file from this archive

Source - http://huafirmware.com/

Dolby Atmos on Any Android(Flashable)

This is the Dolby Atmos ported from LeTv, BQ, and ZTE phone's stock Marshmallow ROM. This should work on all devices (starting from Marshmallow) since it is a software effect. It might conflict with other effects you've already installed. However, it has been extensively tested working alongside ViPER4Android, Maxxaudio, and HTC M9/10 Dolby on several ROM/device combinations. Flash the zip, it will edit and patch (not overwrite) your audio_effects.conf. Currently selinux permissive is recommended.

I understand the UI looks like the old Dolby Digital Plus, but I can assure you that it is much much better. This Atmos is a much more updated version than ones previously released on the Lenovo K3/K4 Note. The Axon 7 Dolby Atmos utilizes both software and hardware components of your device, which means it processes in a much more powerful manner with much more precision and quality and a more natural soundscape. My Lenovo K4 Atmos and Lenovo K3 Atmos both utilize solely a software emulation which results in a more artificial sound experience (that is not as good). However with Axon 7 Atmos version, you will see more realistic sound. When you listen to it you will hear the difference immediately in comparison to other versions. The LeMax 2 and Aquaris X5 Dolby Atmos both only utilize a software effect, however they both sound nearly as good as the Axon 7 Dolby Atmos and are more compatible.

[UPDATED] LeEco LeMax 2 Atmos <v2.3.a.12_r0> 
r1.0:
- Rebuilt from newest 1.8 firmware release
- Audio post-processing (hifi/dts/dirac) integrated into apks (was omitted from previous builds)
- Permissions no longer need to be manually turned on with MM+
- Bug fixes

Download: Link - Mirror


BQ Aquaris X5 Atmos <v2.2.1.7_r1> 
r0.3:
- Initial Public BETA
- Permissions no longer need to be manually turned on with MM+

Download: Link - Mirror


ZTE Axon 7 Atmos <v2.2.1.7_r1>
r0.9.1:
- Fixed issue where plugging in headphones would cause all effects to turn off and require manually turning by on (thanks to @yoinx)

Download: Link - Mirror


Installation:
Each Dobly Atmos above comes from different devices AND manufacturers. To find which Atmos works properly for you, make sure you are Selinux Permissive. Flash LeMax version first, if it does not work then flash Aquaris version second. If that one doesn't work flash Axon version last. If Axon version does not work then I'm sorry, provide a log as I am looking in to fixes. You should be able to flash on top of one another without causing any issues.




Credits of Originality:
- Dolby
- BQ
- LeEco (LeTv)
- ZTE
- Lenovo
- I ported the app myself and made the changes necessary for it to work without FC on most devices

WARNING: Permission to use this for your own mod is and will never be granted to anyone with the exception being A.R.I.S.E. If you would like to use my files for your ROM, and only your ROM, please contact me to obtain permission before doing so. By not adhering to my strict policies, you are in violation and the issue will be forwarded promptly to a moderator. You can thank kangers.

XDA:DevDB Information
Collective Dolby Atmos Port Thread, ROM for all devices (see above for details)

ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: 6.0+

Version Information
Status: Beta
Beta Release Date: 2016-09-21

Created 2016-07-07
Last Updated 2016-09-21

[flashable]Google Pixel Experience (Launcher, Dialer, Assistant & more on any Android)

READ FIRST!
The Pixel Launcher will work on any device running Android 6 or later
Google Dialer works fine on most models, but can have bugs!!! It should work on Android 6 or later
The Google Assistant will only work on Android 7 or later. If you flash this ZIP on Android 6, the installer will install the new Google Search app, but the GoogleAssistant wont work.
To get the Google Assistant working you have to flash the "GoogleAssistantBuildProp.zip" after and copy tweaks.prop to your device.

Description:
This Thread is for an flashable installer, which will install the new Google Pixel Launcher with Wallpaper, Assistant, Dialer.
You can also download the new bootanimation below.
My ZIP File seems also to activate unlimited Google Photos Storage. (Tested on my G3 with CM14, Beanstalk and AOSP 7.0), so maybe this will only work onAndroid 7.

Features:
- Google Pixel Launcher (with working WallpaperPicker)
- Google Pixel Dialer (- Telefone App is making issues -> Just make it the Default phone app and its solved)
- Google Pixel Assistant (thanks to brianelv, take a look at his thread HERE)
- Google Pixel Bootanimation (1920x1080) (black Version)
- Google Pixel Ringtones

Google Pixel Experience - flashable zip file:
Google Pixel Experience will install the new Launcher, Dialer, Google Velvet (not Assistant), Bootanimation & Ringtone while flashing once.
For the assistant take a look down here:

How to install...

...new Google Assistant:
take a look at this thread
- Download all three files mentioned in "Method 2: Flashable ZIPs by @FaserF" from there and copy them to your device, then flash the 2 zip files[/URL]

...new Google Navbar Design:
take a look at my thread here!

...new Bootanimation:
Way 0: Just use the Flashable Experience
Way 1: Download: GooglePixelBootanimation.zip and flash it
Way 2:
- Copy the bootanimation.zip file (inside the GooglePixelBootanimation.zip) on your SD card/ internal storage on your phone
- use a the root explorer, CM File Browser or any other file browser with root access to perform this action
- copy the .zip file into the system/media folder
- give the correct permissons

... Android M Ringtones (note nearly all are the same as in Lollipop!)
Way 1: Download: GooglePixelExperience.zip and flash it
Way 2: Extract the ringtones out of the flashable zip and copy the files to system/media/audio to the correct folder

Screenshots:

Download Here [FIXED V3.5 is live!]

Alternative Download Link (outdated)

Bugs:
- Telefone App is making issues -> Just make it the Default phone app and its solved
- OK Google Hotword doesnt work
- Pixel Launcher will force close on some devices nearly none if you are running a supported android version
- Google Dialer will force close on some devices just pick google dialer as the default phone app!
- Bootanimation could be displayed wrong on devices with a lower resolution than qHD (480p)

Get the original Stuff back:
Download a root browser, open it and activate root access. Now go to /system/priv-app/dialer and /NexusLauncherPrebuild and remove the whole folder, then reboot your phone.

If your old apps dont work again, sorry, but YOU decided to make these modifications and I take absolutly no warrinty for what you are doing!

Q&A | Other Informations:
- Android Version required: 6.0+
- WARNING: As this is taken from a device that is not similar to yours, it still can have risks! Keep this in mind! It was originally made for Android 7.1, not less. I am not responsible for bricked devices, or other things! YOU have decided to make these modifications!
- Some devices need Google's Dialer Framework to get the Dialer work correctly. If you are running a device with opengapps you are fine. If you are on stock you maybe dont have the framework.

Please give a "thanks" to me if you like my work by pressing the Recommend and I will give my best to continue it

Changelog

V3.5: (28.11.16)
- fixed not installing in recovery (error) [for the Android 6+ Version]
- fixed Google Keyboard issues?

V3.0-3.4: (24.11.16)
- Added dark Pixel Bootanimation
- updated Google Apps
- fixed uninstalling wanted user apps
- fixed having 2 contacts & phone apps
- fixed not installing in recovery (error

HUAWEI Y6 ii LYO-L21 - successfully unlocked

HUAWEI Y6 II compact LYO-L21 or HONOR A5 sim unlock done by Sigmakey 
I have followed some instruction from xda, so i'd like to wrap it here :

1. Unlock your bootloader REQUIRED - register to get your unlock password https://emui.huawei.com/en/plugin/unlock/detail 
( put ur phone into adb fastboot and unlock it from CMD - "fastboot oem unlock 123456789123456789" )

for those who doesn't know where to find product id, type *#*#1357946#*#* - its eight numbers id 

2. Root your Huawei by installing TWRP 3.0.2.0 from fastboot - turn off your phone , PRESS VOL- + POWER BUTON and type "fastboot flash recovery twrp.img" -

Download TWRP 3.0.2.0 :
Download

More details from : http://forum.xda-developers.com/gene...l-sim-t3491283

3. Then put SuperSU to sd card aind install it from recovery - PRESS VOLUME + and POWER BUTON to enter and install.
Download SuperSU
Download

From SigmaKey choose in the upper left corner ADB platform and select ur port then click direct unlock . 

Logs :

Quote:

SigmaKey v.2.21.03
827875666 Sigma dongle 2.21, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated

SigmaKey 2.21.03 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ Android Adapter ADB Interface
Version: Linux version 3.10.65+ (jslave@WUH1000036267) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Jul 28 06:37:21 CST 2016
Phone model: HUAWEI HUAWEI LYO-L21
Android 5.1; Firmware: HUAWEILYO-L21; Date: Thu Jul 28 06:24:23 CST 2016
Version: LYO-L21C577B122
Baseband Firmware: MOLY.LR9.W1444.MD.LWTG.MP.V42.P35,MOLY.LR9.W1444.M D.LWTG.MP.V42.P35, 2016/07/07 21:02
Baseband Processor: MT6735
Software IMEI1: 861949034167318
Software IMEI2: 861949034201695
Security area saved to "C:\Users\HP\Documents\SigmaKey\security backup\861949034167318_HUAWEI_HUAWEI LYO-L21_HUAWEILYO-L21_Thu Jul 28 062423 CST 2016.skb"
Unlocking phone...Done
Restarting phone...Done

Notice : I'm not responsible for any damage on your phone. If you don't know how to use files, search xda forum , get counslt or leave this thread. Thanks

[CUSTOM ROM] [CoolUI 6.0] Another custom ROM for Coolpad Dazen 1

This is CoolUI 6.0 from Coolpad itself cooked by me.
Rom is very stable and worth a try. 

What works:
Everything for daily use

Bugs:
I didn't check everything so you tell me if u find any. 

Disclaimer: Don't blame me or anyone else if you brick your device or lose data stored in it. You will be responsible for what you are going to do. But if you face any ussue share it in the forum we will try to help you in every possible way.

Note:Always take a nandroid backup before flashing. 

How to install?
Download the rom.
Flash it through TWRP.
Reboot.

After first reboot press home key and select startup wizard to go through startup wizard or just carry on without doing it. It doesn't actually matter much.
Just remove all apps with Chinese texts.

Don't apply OTA. 



Enjoy...

Attached Thumbnails

                             

Xiaomi Redmi 4 Prime/Pro unlock Bootloader ( Official way )

First things first.
I have too low amount of posts to post in dev sections so its there.
None of described software belongs to me. And im not responsible for damages.

Okay so me and probably others have/had problems with unlocking your Xiaomi Redmi 4 Prime.
These are simple steps to succes.

what is needed: Redmi 4 pro, ADB drivers

1. Sign to Xiaomi and apply for unlocking http://en.miui.com/unlock/
It is important to add correct data.

2. Connect to your Mi account on the device and enable Find Device option under Xaiomi cloud
if it is done correctly u will be able to find ur device at https://i.mi.com

3 Wait for permission u will receive SMS message.

4. When permission is aquired and device is connected to Mi Cloud we have to try to unlock the device.

5 . Download Mi Unlock software ( added to post )
explanation : Not the newest version of unlocker because the newest one have bad translations and it probably wont find ur device correctly and will result in fail at 50 %

6 .Enable developer settings
System info -> couple of clicks on MiUi version
Back - > more settings -> developer settings - > Enable OEM unlock

7. Reboot to fastboot ( Vol down + power ) till some (russian?) bunny appears

8. Perform unlock from Mi Unlocker and press
Left button
enter Login(email) and password to mi account
Connect the phone and press the button !

9 Reboot. You should be done Congrats !

You can install miui global now or any other rom. to Perform you have to :
1. Boot to fastboot
2.Download Cofface Recovery http://forum.xda-developers.com/andr...overy-t3504778
3.connect the phone
4. in console window type: fastboot flash recovery RECOVERYNAME.img
5.Boot to recovery and install the rom

Happy flashing !


Hard brick ?
solution !

Quote: 

this video
https://www.youtube.com/watch?v=j27x5iJSS40
solved the day!

Attached Files

MiFlashUnlock.zip(1.83 MB, 877 views)